Short Description: |
Schneider MCB/RCD Padlocking Device 18mm IC60 C60 IID IIDK IK60 PK 10
|
BUSBAR 24MOD 4P 100A COMB
|
Schneider Shunt Trip AC Unit IMX-OF 100-415V 110-130V Acti9
|
UNDERVOLTAGE RELEASE 48V AC ACTI9 IMN FOR
|
INTERPOLE BARRIER COMPATIBLE WITH IC60 IID IDPN VIGI ISW
|
BUSBAR 12MOD 4P 100A COMB
|
Schneider Undervoltage Release 220-240V AC Acti9 IMN
|
Schneider Acti9 Padlocking Device Left
|
TERMINAL SHIELD 36MM 2 X ACTI9 IC60 IID
|
TERMINAL SCR CONN SHIELD ACTI9 IC60 IID
|
SHUNT TRIP 48V AC ACTI9 IMX-OF W
|
OVERVOLTAGE RELEASE IMSU COMPATIBLE WITH IC60 IID IDPN VIGI
|
BUSBAR 2P END CAPS A SET10
|
Schneider Shunt Release AC Acti9 IMX-OF 12-24V
|
UNDERVOLTAGE RELEASE 220-240V AC ACTI9 IMNS
|
UNDERVOLTAGE RELEASE 220-240V AC ACTI9 IMNX
|
BUSBAR 4P END CAPS A SET10
|
Schneider Cable Connector Insulated 100A Up to 35mm 4PK
|
BUSBAR TOOTH CAPTR SET20
|
HANDLE ROT SW FOR 2/3/4 POLE FOR IC60 IID IDPN VIGI ISW
|
HANDLE ROT SW FOR 2/3/4 POLE FOR IC60 IID IDPN VIGI ISW
|
UNDERVOLTAGE RELEASE 380-415V AC ACTI9 IMNX
|
BUSBAR 57MOD 4P 100A COMB AUX
|
SPACER 9MM FOR IC60 IID IDPN VIGI ISW
|
CONTACT AUX MCB/RCD ACTI9 IOF SD 24VDC W/ TI24 PLC I/F
|
Schneider Auxiliary Contact MCB/RCD IS D Curve 240-415V AC 24-130V DC Fault
|
Long Description: |
This Acti 9 padlocking device is used to padlock in open or closed position. It is dedicated to Acti 9 iC60, iID, iDPN Vigi, iSW-NA. The padlock diameter is from 3mm to 6mm. The sealable maximum diameter is 1.2mm. The locking in ON position does not prevent tripping of the breaker in the event of faults. This yellow padlocking accessory is mounted on the front of the product to be protected. This mounting device is suitable for iC60, iC60 + Vigi, iID, iDPN Vigi, iSW-NA, iSW Acti 9. This product is suitable with IEC/EN 60947-2 standard compliant disconnection.
|
This Acti 9 horizontal comb busbar 18mm modules for Acti 9 iC60 or Acti 9 iK60 is cuttable. It is dedicated to N+3L installations. The type is NL1L2L3 (Neutral, Line). It is a set of 1 device. It is suitable for 6 devices (3P+N). The length is 430mm.The total number of modules of 18mm is 24. The pin cross section is 16mm2. The type of electric connection is PIN. The number of phase is 3. The number of poles is 4. The Ie rated operational current at 40°C is 100A. The Isc short circuit current is compatible with the breaking capacity of Schneider Electric circuit breakers. The Ui rated insulation voltage is 500VAC. The Ue rated operational voltage is 415VAC. The color of the device is white RAL9003. The pollution degree is 3. According to IEC 60695-2-1 standard the fire resistance is self-extinguishing at 960°C within 30s. It complies with IEC 60947-7-1 and IEC 61439-2 standards.
|
This Acti 9 MX+OF electrical tripping auxiliary for is a shunt trip release. It is dedicated to Acti9 iC60, iID, iC40, iC40 XA, iCV40, iID40, iCV40 XA, iDPN Vigi, iSW-NA, iKQE, iC60 RCBO. This device includes an open/close contact OF to indicated the position of the associated device. Emergency stoppage by normally open pushbutton. The product trips the associated device when it is powered on by emergency pushbutton. The width in 9mm pitches is 2. The Ue rated operational voltage is 100VAC to 415VAC or 110VDC to 130VDC. The operating frequency is 50Hz or 60Hz. The Ie rated operational current is 6A under 24VDC, 2A under 48VDC, 1.5A under 60VDC, 1A under 130VDC. The Ie rated operational current is 6A under 24VAC to 240VAC, 3A under 415VAC. There is a mechanical state indicator light, red on the front face. The operating temperature is -25°C to + 50°C. The storage temperature is -40°C to + 85°C. This product complies with IEC/EN 60947-5-1 standard and EN 62019-2 standard only for C120.
|
undervoltage release, Acti9, iMN, voltage release, 48 V AC has a part number of A9A26961, and is part of the Acti 9 iC60 range of products by Schneider Electric. Measuring at 8CM tall, 3CM wide, 9.4CM deep, and has a weight of 79G. The barcode of this product is 3606480088001.
|
This Acti 9 insulation accessory is a set of 10 interphase barrier. This accessory is compatible with Acti 9 iC60, iSW, iID, iKQ, iSW-NA, Reflex iC60, ARA, and RCA. Mounting mode is by clips. This product is compliant with EN/IEC 61008-1.
|
This Acti 9 horizontal comb busbar 18mm modules for Acti 9 iC60 or Acti 9 iK60 is cuttable. It is dedicated to N+3L installations. The type is NL1L2L3 (Neutral, Line). It is a set of 1 device. It is suitable for 3 devices (3P+N). The length is 220mm.The total number of modules of 18mm is 12. The pin cross section is 16mm2. The type of electric connection is PIN. The number of phase is 3. The number of poles is 4. The Ie rated operational current at 40°C is 100A. The Isc short circuit current is compatible with the breaking capacity of Schneider Electric circuit breakers. The Ui rated insulation voltage is 500VAC. The Ue rated operational voltage is 415VAC. The color of the device is white RAL9003. The pollution degree is 3. According to IEC 60695-2-1 standard the fire resistance is self-extinguishing at 960°C within 30s. It complies with IEC 60947-7-1 and IEC 61439-2 standards.
|
This Acti 9 iMN electrical auxiliary is an instantaneous undervoltage release. It is dedicated to Acti 9 iC60, iID, iDPN Vigi, iSW-NA. It prevents device closing again until its input voltage has been restored. Emergency stoppage by normally open pushbutton. It ensures the safety of power supply circuits for several machines by preventing uncontrolled restarting. The width in 9mm pitches is 2. It trips the device with which it is combined when its input voltage decreases (between 70% and 35% of Un). The Ue rated operational voltage is 200VAC to 240VAC. The operating frequency is 50Hz or 60Hz. The operating temperature is -35°C to + 70°C. The storage temperature is -40°C to + 85°C. This product complies with IEC/EN 60947-5-1 standards.
|
Acti9 - left padlocking device has a part number of A9A26380, and is part of the Acti 9 accessories range of products by Schneider Electric. Measuring at 0.222DM tall, 0.852DM wide, 0.872DM deep, and has a weight of 0.034KG. The barcode of this product is 3606480883019.
|
This Acti 9 insulation accessory is a set of 2 terminal shield. Suitable for 2P Circuit protection. This accessory is compatible with Acti 9 iC60, iSW, iKQ, iID, iID40, iSW-NA, Reflex iC60, ARA, and RCA. Device location in product is top or bottom, and mounting mode is by clips. This product is compliant with EN/IEC 61008-1.
|
This Acti 9 insulation accessory is a set of 20 screw shield. Suitable for 1P, 1P+N, 2P, 3P, 3P+N, and 4P Circuit protection. This accessory is compatible with Acti 9 iC60, iSW, iID, iSW-NA, Reflex iC60, ARA, and RCA Device location in product is top and bottom, and mounting mode is by clips. This product is compliant with EN/IEC 61008-1.
|
shunt trip release with OC contact, Acti9, iMX+OF, voltage release, 48 V AC has a part number of A9A26947, and is part of the Acti 9 iC60 range of products by Schneider Electric. Measuring at 3CM tall, 7.9CM wide, 9.3CM deep, and has a weight of 84G. The barcode of this product is 3606480087967.
|
This Acti 9 iMSU electrical auxiliary is an overvoltage release. It is dedicated to iC60, iID, iID40, iDPN Vigi, iSW-NA, iC40, iCV40, iC40 XA, iCV40 XA, iCV40 XA, iC60 & iID double terminals, iC60 RCBO, iKQE RCBO. For a four-phase network, use three iMSU tripping auxiliaries. It provides a protection of equipment against overvoltage on the electrical network (neutral conductor break) and voltage monitoring between phase and neutral conductors. It switches of the power supply by opening the breaker with which it is combined, in the event that the phase/neutral voltage is exceeded. The width in 9mm pitches is 2. There is a red mechanical indicator on the front face of the product to indicate the tripped position of the associated device. The Ue rated operational voltage is 230VAC. The operating frequency is 50Hz or 60Hz. The operating temperature is -35°C to + 70°C. The storage temperature is -40°C to + 85°C. This product complies with IEC/EN 60947-5-1 standards.
|
set of 10 end caps 2 Poles for Acti 9 has a part number of A9XPE210, and is part of the C60 UL/CSA/IEC range of products by Schneider Electric. Measuring at 1.02CM tall, 12.5CM wide, 10CM deep, and has a weight of 20G. The barcode of this product is 3606480485237.
|
This Acti 9 iMX+OF electrical auxiliary is a shunt release device with open/close auxiliary contact. It is dedicated to iC60, iID, iDPN Vigi, iSW-NA. This device includes an open/close contact OF to indicated the position of the circuit breaker. Emergency stoppage by normally open pushbutton. It provides a remote indication of the position of the associated device. The width in 9mm pitches is 2. The product trips the associated device when it is powered on. The In rated operational current is from 10mA (mini) up to 6A (maxi) under 24VDC, 48VDC, 130VDC, 240VDC, 415VDC. The operating temperature is -35°C to + 70°C. The storage temperature is -40°C to + 85°C. This product complies with IEC/EN 60947-5-1 standards.
|
undervoltage release, Acti9, iMNs, voltage release, 220...240 V AC has a part number of A9A26963, and is part of the Acti 9 iC60 range of products by Schneider Electric. Measuring at 3CM tall, 8CM wide, 9.4CM deep, and has a weight of 81G. The barcode of this product is 3606480088018.
|
This Acti 9 iMNx electrical auxiliary is an undervoltage release independent of the supply voltage. It is dedicated to iC60, iID, iDPN Vigi, iSW-NA and iC60, iID double terminals. The width in 9mm pitches is 2. It trips the associated device by opening of the control circuit. A drop in the supply voltage does not trip the associated device. There is a red mechanical indicator on the front face of the product to indicate the tripped position of the associated device. The Ue rated operational voltage is 220VAC to 240VAC. The operating frequency is 50Hz or 60Hz. The operating temperature is -35°C to + 70°C. The storage temperature is -40°C to + 85°C. This product complies with IEC/EN 60947-5-1 standards.
|
set of 10 end caps 4 Poles for Acti 9 has a part number of A9XPE410, and is part of the C60 UL/CSA/IEC range of products by Schneider Electric. Measuring at 2.14CM tall, 12.5CM wide, 10CM deep, and has a weight of 30G. The barcode of this product is 3606480485251.
|
This Acti 9 Linergy FH monoconnect connector for Acti 9 iC60 and Acti 9 iK60 facilitates comb busbar power supply. It is a set of 4 devices. The Type of electric connection is PIN. The pin cross section is 16mm2. The cross section of the cable connector is 35mm2. The tightening torque is 4N.m. The color of the device is white RAL9003. The pollution degree is 3. It complies with IEC 60947-7-1 and IEC 61439-2 standards.
|
set of 20 tooth caps for Acti 9 has a part number of A9XPT920, and is part of the C60 UL/CSA/IEC range of products by Schneider Electric. Measuring at 1.5CM tall, 4.6CM wide, 8.5CM deep, and has a weight of 14G. The barcode of this product is 3606480485268.
|
This Acti 9 rotary handle for front or side-mounted control is black. This mounting accessory is suitable for iC60 (2P, 3P, 4P), iSW (2P, 3P, 4P), iC60+vigi (2P, 3P, 4P), iID, iSW-NA. The rotary handle is fixed on the front or the side of the enclosure. It prevents the door from opening when the device is in On position but it can desactivated by adaptation. It is a set of 1 device. The front-mounted is possible on door or faceplate. It can be padlocked when the device is in the Open position or Closed position with adaptation. A pushbutton for iID test is available in the front face of the rotary handle. The degree of protection is IP55. The 5mm to 8mm diameter padlock is not supplied with the device. The dimensions of the front face of the rotary handle are (W) 75mm x (H) 75mm. The operating temperature is -25°C to + 55°C.
|
This Acti 9 accessory is a red rotary handle provided with a rotary handle mechanism for modular devices with front or side mounting installation. It is dedicated to iID, iSW-NA, 2P or 3P or 4P (iC60 + Vigi iC60, iSW, iC60). It prevents the door from opening when the device is in the ON position. The control mechanism is mounted on the device. The rotary handle is fixed to the front or side of the enclosure. It is a set of 1 device. The color of the handle is red. A padlocking is possible when the device is in open position (OFF). It could be padlocked with the device in the closed position (ON) by adaptation of the device. The padlock diameter is from 5mm to 8mm. A pushbutton for iID test is available on the front face of the rotary handle. The material is a self-extinguishing thermoplastic specially developed by Schneider Electric. The degree of protection of the rotary button is IP55.
|
undervoltage release, Acti9, iMNx, voltage release, 380...415 V AC has a part number of A9A26971, and is part of the Acti 9 iC60 range of products by Schneider Electric. Measuring at 3CM tall, 8.1CM wide, 9.2CM deep, and has a weight of 91G. The barcode of this product is 3606480088032.
|
This Acti 9 horizontal comb busbar 18mm modules with 9mm auxiliary for Acti 9 C60 is cuttable. It is dedicated to Aux+3L installations. The type is AuxL1L2L3 (Auxiliary, Line). It is a set of 1 device. It is suitable for 12 devices (3P) with associated auxiliaries. The length is 1000mm. The total number of modules of 18mm is 57. The pin cross section is 16mm2. The type of electric connection is PIN. The number of phase is 3. The number of poles is 4. The Ie rated operational current at 40°C is 100A. The Isc short circuit current is compatible with the breaking capacity of Schneider Electric circuit breakers. The Ui rated insulation voltage is 500VAC. The Ue rated operational voltage is 415VAC. The color of the device is anthracite grey RAL7016. The pollution degree is 3. According to IEC 60695-2-1 standard the fire resistance is self-extinguishing at 960°C within 30s. It complies with IEC 60947-7-1 and IEC 61439-2 standards.
|
spacer, Acti9, set of 5, 9 mm pitch, white has a part number of A9A27062, and is part of the Acti 9 iC60 range of products by Schneider Electric. Measuring at 4.5CM tall, 7CM wide, 8.6CM deep, and has a weight of 81G. The barcode of this product is 3606480088155.
|
This Acti 9 iOF+SD24 electrical auxiliary is a double open/close and fault indicating contact. It is dedicated to iC60, iC40, iCV40, iID, iID40, iDPN Vigi, iSW-NA, iC60 & iID double terminals. The 2 contacts 1 NO + 1NC can report the signalling information of the associated device to the Acti 9 Smartlink. It reports also the electrical fault, actuation of the tripping auxiliary, Open or Closed position of the associated device informations to a programmable logic controller. The width in 9mm pitches is 1. It is compatible with downstream com busbar. Remote indication of position and tripping upon a fault of the associated device. The In rated operational current is from 2mA (mini) up to 100mA (maxi) depending on the rated voltage. The Ue rated operational voltage is 240VDC. The operating temperature is -25°C to + 70°C. The storage temperature is -40°C to + 85°C. This product complies with IEC/EN 60947-5-1 standards.
|
|
AdditionalDescription: |
PADLOCKING DEVICE - 18 MM |
COMB BUSBAR - EASY TO CUT - ACTI 9 4 POLES 24 MODULES 100A |
VOLTAGE RELEASE - IMX+OF - TRIPPING UNIT - 220..415 VAC |
VOLTAGE RELEASE - IMN - TRIPPING UNIT - 48 VAC |
INTERPHASE BARRIERS - FOR IC60, IID, REFLEX IC60, ISW-NA |
COMB BUSBAR - EASY TO CUT - ACTI 9 4 POLES 12 MODULES 100A |
VOLTAGE RELEASE - IMN - TRIPPING UNIT - 220..240 VAC |
|
TERMINAL SHIELD - 2 POLES - 36 MM - FOR IC60, IID, REFLEX IC60, ISW-NA |
SCREW SHIELD - 4 POLES - 72 MM - FOR IC60, IID, REFLEX IC60, ISW-NA |
VOLTAGE RELEASE - IMX+OF - TRIPPING UNIT - 48 VAC |
VOLTAGE RELEASE IMSU - ADJUSTABLE THRESHOLD |
SET OF 10 END CAPS 2 POLES FOR ACTI 9 |
VOLTAGE RELEASE - IMX+OF - TRIPPING UNIT - 12..24 VAC |
VOLTAGE RELEASE - IMNS - TRIPPING UNIT - 220..240 VAC |
VOLTAGE RELEASE - IMNX - TRIPPING UNIT - 220..240 VAC |
SET OF 10 END CAPS 4 POLES FOR ACTI 9 |
SET OF 4 CONNECTORS 100A MONOCONNECT |
SET OF 20 TOOTH CAPS FOR ACTI 9 |
ROTARY HANDLE - FOR IC60 - BLACK HANDLE |
ROTARY HANDLE - FOR IC60 - RED HANDLE |
VOLTAGE RELEASE - IMNX - TRIPPING UNIT - 380..415 VAC |
COMB BUSBAR - EASY TO CUT - ACTI 9 4 POLES + AUX 57 MODULES 100A |
ACTI 9 - SPACER - 9 MM WHITE |
AUXILIARY CONTACT IOF+SD - 24V DC WITH TI24 INTERFACE |
|