Short Description: |
UNDERVOLTAGE RELEASE 220-240V AC MNX GHOST
|
UNDERVOLTAGE RELEASE 220-240V AC MAIN GHOST
|
Schneider Busbar 24 Module 2 Pole 100A Comb
|
Schneider Shunt Trip AC MX MX PLUS 1 OF 220 415V
|
SHUNT TRIP AC MX MX PLUS 1 OF 48-130V
|
Schneider Shunt Trip 24V AC/DC MX+OF CCC 50/60Hz
|
MCB SCREW SHIELD C60 PK2
|
Schneider Busbar 12 Module 2 Pole 100A Comb
|
Schneider MCB Cable Terminal Aluminium C120
|
UNDERVOLTAGE RELEASE 220-240V AC MAINGHOST
|
Schneider Auxiliary Contact OC Plus 1 SD and OF AC
|
UNDERVOLTAGE RELEASE 380-415V AC MNX GHOST
|
UNDERVOLTAGE RELEASE 48V AC MAIN GHOST
|
AUXILIARY CONTACT ALARM SD AC DC CCC / G
|
AUX INTERFACE 24V OF SD CAPTR AVEC TI24
|
BUSBAR 57MOD 2P 100A COMB AUX
|
CIRCUIT-BREAKER OPERATING SUB-ASSEMBLY( POA )
|
Schneider Lockout Device MCB 2pk for Padlock & C60 Series
|
FIX EXTENDED ROTARY HANDLE
|
MCB DRAWOUT EXTENDED ROTARY HANDLE
|
Long Description: |
This Acti 9 MNx electrical auxiliary is an undervoltage release independent of the supply voltage. It is dedicated to C60, C120, DPN Vigi, iD, C60H-DC, SW60-DC, C60PV-DC, C60NA-DC, C120NA-DC. A locking push-button control allows the circuit protected to be placed in safety configuration. It provides a fail-safe emergency stop. The product is insentive to the varaition in the control circuit voltage to improve continuty of service. The product trips the associated device by opening of the circuit control. The width in 9mm pitches is 2. There is a red mechanical indicator on the front face of the product to indicate the tripped position of the associated device. The Ue rated operational voltage is 230VAC. The operating frequency is 50Hz or 60Hz. The operating temperature is -25°C to + 50°C. The storage temperature is -40°C to + 85°C. This product complies with IEC/EN 60947-5-1 standards.
|
This Acti 9 MN electrical auxiliary for C60, C10, DPN, Vigi, ID, C60H-DC, SW60-DC, C60PV-DC, C60NA-DC, C120NA-DC is an instantaneous undervoltage release. It trips the device with which it is combined when its input voltage decreases (between 70% and 35% of Un). Emergency stoppage by normally open pushbutton. It ensures the safety of power supply circuits for several machines by preventing uncontrolled restarting. The width in 9mm pitches is 2. It prevents device closing again until its input voltage has been restored. The Ue rated operational voltage is 220VAC to 240VAC. The operating frequency is 50Hz or 60Hz. The operating temperature is -25°C to + 50°C. The storage temperature is -40°C to + 85°C. This product complies with IEC/EN 60947-1 and EN 60947-2 standards.
|
This Acti 9 horizontal comb busbar 18mm modules for Acti 9 iC60 or Acti 9 iK60 is cuttable. It is dedicated to N+1L installations. The type is NL (Neutral, Line). It is a set of 1 device. It is suitable for 12 devices (1P+N). The length is 430mm. The total number of modules of 18mm is 24. The pin cross section is 16mm2. The type of electric connection is PIN. The number of phase is 1. The number of poles is 2. The Ie rated operational current at 40°C is 100A The Isc short circuit current is compatible with the breaking capacity of Schneider Electric circuit breakers. The Ui rated insulation voltage is 500VAC. The Ue rated operational voltage is 415VAC. The color of the device is white RAL9003. The pollution degree is 3. According to IEC 60695-2-1 standard the fire resistance is self-extinguishing at 960°C within 30s. It complies with IEC 60947-7-1 and IEC 61439-2 standards.
|
This Acti 9 MX+OF electric tripping auxiliary is a shunt trip release with open/close auxiliary contact. It is dedicated to Acti 9 C120, C60H-DC, DPN N Vigi. This device includes an open/close contact OF to indicate the position of the circuit breaker. It provides a remote indication of the position of the associated device. The product trips the associated device when it is powered on. Emergency stoppage by normally open pushbutton. The width in 9mm pitches is 2. The Ue rated operational voltage is 100VAC to 415VAC or 110VDC to 130VDC. The operating frequency is 50Hz or 60Hz. The Ie rated operational current is 6A under 24VDC, 2A under 48VDC, 1.5A under 60VDC, 1A under 130VDC. The Ie rated operational current is 6A under 24VAC to 240VAC, 3A under 415VAC. There is a mechanical state indicator light, red on the front face. The operating temperature is -25°C to + 50°C. The storage temperature is -40°C to + 85°C. This product complies with IEC/EN 60947-5-1 standards and EN 62019-2 standard only for C120.
|
MX Shunt Trip MX plus 1 OF 48-130Vac dc has a part number of A9N26947, and is part of the Clario / Librio / Prodis : iDPN, C40, DT40 range of products by Schneider Electric. Measuring at 2.9CM tall, 7.9CM wide, 9.3CM deep, and has a weight of 77G. The barcode of this product is 3606480382963.
|
This Acti 9 MX+OF shunt trip release is an electric tripping auxiliary with open/close auxiliary contact. It is dedicated to C60, C120, DPN, DPN Vigi, C60H-DC, SW60-DC, C60PV-DC, C60NA-DC, C120NA. This device includes an open/close contact OF to indicate the position of the circuit breaker. Emergency stoppage by normally open pushbutton. It provides a remote indication of the position of the associated device. The product trips the associated device when it is powered on. The width in 9mm pitches is 2. There is a mechanical state indicator light, red on the front face. The Ue rated operational voltage is 24 to 24VDC or 12 to 24VAC. The operating frequency is 50Hz or 60Hz. The Ie rated operational current is 6A under 24VDC, 2A under 48VDC, 1.5A under 60VDC, 1A under 130VDC. The Ie rated operational current is 6A under 24VAC to 240VAC, 3A under 415VAC. The operating temperature is -25°C to + 50°C. The storage temperature is -40°C to + 85°C. This product complies with IEC/EN 60947-5-1 standards.
|
screw shields - for C60 I - NA ID - set of 2
|
This Acti 9 horizontal comb busbar 18mm modules for Acti 9 iC60 or Acti 9 iK60 is cuttable. It is dedicated to N+1L installations. The type is NL (Neutral, Line). It is a set of 1 device. It is suitable for 6 devices (1P+N). The length is 220mm.The total number of modules of 18mm is 12. The pin cross section is 16mm2. The type of electric connection is PIN. The number of phase is 1. The number of poles is 2. The Ie rated operational current at 40°C is 100A. The Isc short circuit current is compatible with the breaking capacity of Schneider Electric circuit breakers. The Ui rated insulation voltage is 500VAC. The Ue rated operational voltage is 415VAC. The color of the device is white RAL9003. The pollution degree is 3. According to IEC 60695-2-1 standard the fire resistance is self-extinguishing at 960°C within 30s. It complies with IEC 60947-7-1 and IEC 61439-2 standards.
|
Terminal for aluminium cables from 16 to 50 mm2 - set of 1
|
Voltage release MN (S) 220-240Vac dc has a part number of A9N26963, and is part of the Clario / Librio / Prodis : iDPN, C40, DT40 range of products by Schneider Electric. Measuring at 2.9CM tall, 8CM wide, 9.4CM deep, and has a weight of 79G. The barcode of this product is 3606480383014.
|
This Acti 9 OF+SD/OF electric auxiliary is a double open/closed or fault indicator contact. It is dedicated to Acti 9 C120, C60H-DC, DPN N Vigi. It comes with 1 changeover contact indicating the open or closed position (OF). It provides a remote position open/close and/or fault tripping indication of the associated device. It is a two-in-one product. The choice of OF+SD or OF+OF contact is made via the selector switch on front face. The width in 9mm pitches is 1. The Ue rated operational voltage is 24VAC to 415VAC or 24VDC to 130VDC. The operating frequency is 50Hz or 60Hz. The Ie rated operational current is 6A under 24VDC, 2A under 48VDC, 1.5A under 60VDC, 1A under 130VDC. The Ie rated operational current is 6A under 24VAC to 240VAC, 3A under 415VAC. There is a mechanical state indicator and a test function button on the front face. The operating temperature is -25°C to + 50°C. The storage temperature is -40°C to + 85°C. This product complies with IEC/EN 60947-5-1 standard and EN 62019-2 standard only for C120.
|
Voltage release MNx 380-415Vac dc has a part number of A9N26971, and is part of the Clario / Librio / Prodis : iDPN, C40, DT40 range of products by Schneider Electric. Measuring at 3CM tall, 8CM wide, 9.5CM deep, and has a weight of 85G. The barcode of this product is 3606480383038.
|
Voltage release MN 48Vac dc has a part number of A9N26961, and is part of the Clario / Librio / Prodis : iDPN, C40, DT40 range of products by Schneider Electric. Measuring at 2.9CM tall, 7.9CM wide, 9.2CM deep, and has a weight of 72G. The barcode of this product is 3606480383007.
|
This Acti 9 SD electric auxiliary is a remote fault indicator contact. It is dedicated to Acti 9 C120, C60H-DC, DPN N Vigi. It comes with 1 changeover contact indicating the position of the associated device. It indicates the position of the associated device in the event of electrical fault or action on the tripping auxiliary. The width in 9mm pitches is 1. The Ue rated operational voltage is 24VAC to 415VAC or 24VDC to 130VDC. The operating frequency is 50Hz or 60Hz. The Ie rated operational current is 6A under 24VDC, 2A under 48VDC, 1.5A under 60VDC, 1A under 130VDC. The Ie rated operational current is 6A under 24VAC to 240VAC, 3A under 415VAC. There is a mechanical state indicator and a test function button on the front face. Be careful, this device is not compatible with an ID residual current circuit breaker. The operating temperature is -25°C to + 50°C. The storage temperature is -40°C to + 85°C. This product complies with IEC/EN 60947-5-1 standard and EN 62019-2 standard only for C120.
|
This Acti 9 OF+SD24 electrical auxiliary is a double open/close or fault indicator contact. It is dedicated to iD, C60, C120, DPN, DPN Vigi, C60H-DC, SW60-DC, C60PV-DC, C60NA-DC, C120NA-DC It reports also the electrical fault, actuation of the tripping auxiliary, open or closed position of the associated device informations to a programmable logic controller. Remote indication of position and tripping upon a fault of the associated device. The 2 contacts (1NO + 1NC) can report the signalling information of the associated device to the Acti 9 Smartlink. The width in 9mm pitches is 1. It is a ComReady device. There is a Test function on the toggle. The Ue rated operational voltage is 24VDC. The In rated operational current is 2mA (mini) up to 100 mA (maxi). The operating temperature is -25°C to + 70°C. The storage temperature is -40°C to + 85°C. This product complies with IEC/EN 60947-5-1. and IEC/EN 60947-5-4 standards.
|
This Acti 9 horizontal comb busbar 18mm modules with 9mm auxiliary for Acti 9 iC60 or Acti 9 iK60 is cuttable. It is dedicated to Aux+3L installations. The type is AuxL1L2L3 (Auxiliary, Line). It is a set of 1 device. It is suitable for 22 devices (3P) with associated auxiliaries. The length is 1000mm.The total number of modules of 18mm is 57. The pin cross section is 16mm2. The type of electric connection is PIN. The number of phase is 1. The number of poles is 2. The Ie rated operational current at 40°C is 100A. The Isc short circuit current is compatible with the breaking capacity of Schneider Electric circuit breakers. The Ui rated insulation voltage is 500VAC. The Ue rated operational voltage is 415VAC. The color of the device is white RAL9003. The pollution degree is 3. According to IEC 60695-2-1 standard the fire resistance is self-extinguishing at 960°C within 30s. It complies with IEC 60947-7-1 and IEC 61439-2 standards.
|
This Acti 9 accessory is a rotary handle mechanism for modular devices with front or side mounting installation. It is dedicated to 2P (C60H-DC), 3P or 4P (DPN, DPN Vigi), 2P or 3P or 4P (C60, C120, C120NA-DC, C120 + Vigi C120, iSW at more than four 9mm pitches). This rotary handle mechanism is mounted on the circuit breaker. This subassembly mechanism can be associated with a removable extended handle (ref. 27047) or a fixed handle (ref. 27048). It is a set of 1 device. The color of the handle is white. The material is a self-extinguishing thermoplastic specially developed by Schneider Electric. The degree of protection of the rotary button is IP40 and IK10.
|
padlocking device - for toggle - set of 2
|
Front, side rotary handle C60 / 120 and NC45 / 100 / 125 - black handle
|
Front rotary handle C60 / 120 and NC45 / 100 / 125 - black handle
|
AdditionalDescription: |
VOLTAGE RELEASE MNX 220-240VAC DC |
VOLTAGE RELEASE MN 220-240VAC DC |
COMB BUSBAR - EASY TO CUT - ACTI 9 2 POLES 24 MODULES 100A |
MX SHUNT TRIP MX PLUS 1 OF 220-415VAC DC |
MX SHUNT TRIP MX PLUS 1 OF 48-130VAC DC |
MX SHUNT TRIP MX PLUS 1 OF 24VAC DC |
SCREW SHIELDS - FOR C60 I - NA ID - SET OF 2 |
COMB BUSBAR - EASY TO CUT - ACTI 9 2 POLES 12 MODULES 100A |
ALUMINIUM TERMINAL - FOR 50 MM2 CABLE - FOR C120 C60 I - NA ID |
VOLTAGE RELEASE MN (S) 220-240VAC DC |
AUXILIARY CONTACT OC PLUS 1 SD AND OF AC DC |
VOLTAGE RELEASE MNX 380-415VAC DC |
VOLTAGE RELEASE MN 48VAC DC |
AUXILIARY CONTACT ALARM SD AC DC |
AUXILIARY CONTACT OF+SD - 24V DC WITH TI24 PLC INTERFACE |
COMB BUSBAR - EASY TO CUT - ACTI 9 2 POLES + AUX 57 MODULES 100A |
FRONT ROTARY HANDLE C60 / 120 AND NC45 / 100 / 125 - BLACK HANDLE |
PADLOCKING DEVICE - FOR TOGGLE - SET OF 2 |
|
FRONT ROTARY HANDLE C60 / 120 AND NC45 / 100 / 125 - BLACK HANDLE |