Product image may be indicative and not an exact representation.

Additional Information

General Descriptionthe Kounis Group K-Strut Support Systems Were Designed As A Site Adaptablemechanical Support Method; This Product Range Complements Almost Anyinstallation Of Cable, Pipe, Hvac Or General Support Structure.The Key To Making Any Installation Easy And Ensuring Performance Of The Finalproduct Is To Ensure Selection Of The Correct Parts And Finishes; Below Is Some Keyinformation You May Require To Assist Selection:Product Finishesmild Steel Post Production Hot Dip Galvanised Surface Treatment To AS/NZS1365, As1594 And AS/NZS4680°Ction Zinc Plated Surface Treatment To As1789Mild Steel Mill Finish No Surface Treatmentpainted Finish Available On Request.Load Ratingsallowable Loading For The K-Strut Product Range Is Listed In Tables Located On Therelating Product Page. All Published Slip Out, Pull Out And Load Ratings Have Beenderived By Calculation Based On Ultimate Load Capacity Prior To Product Failuretaking Into Account A Safety Factor Of 1.5.K-Strut Channel Is Typically Used In Either A Support Beam Or Support Columnarrangement.Support Beam Technical Data Lists Maximum Allowable Uniform Load And Midspan Deflection At A Range Of Spans. Together With This Data We Have Designateda Loading To Span Which Will Give A Deflection Ratio Of 1/200 Of The Span. This Willgive A Recognized Practical Beam Deflection To Minimize Sagging Of The Beamunder Load.Support Column Technical Data Lists Maximum Lateral Loading At A Range Onunbraced Heights.Product Weightsall Itemised Product Weights Are Located Under The Alpha Numeric Listing At Theback Section Of This Catalogue.